Products Power Transmission Products

  • Corrosion Resistant Conveyor Chain

GS Series

Stainless steel chain with better corrosion resistance than DT series (Uses 400 series stainless steel)

Operating temperature range: -20°C to 400°C

Contact a Tsubaki representative when using below -20°C.

GS Series

1. Reference Number System

RF03075 R - GS - 1L A2
(1) (2) (3) (4) (5)
  • (1) Chain size
  • (2) Roller type: R = R roller, F = F roller, S = S roller, M = M roller, N = N roller
  • (3) Series
  • (4) Attachment spacing
  • (5) Attachment type

2. Table of Sizes and Strength

  • Maximum allowable load is a value calculated based on Tsubaki in-house standards and is calculated strength. As long as there are no other constraints, maximum allowable load is used in selecting large size conveyor chain. This value will differ by manufacturer and is not a guaranteed value.
  • Contact a Tsubaki representative regarding average tensile strength.

Meter

Size Pitch (mm) Max. allowable load (kN)
RF03075 75 5.40
RF03100 100
RF05075 75 10.8
RF05100 100
RF05125 125
RF05150 150
RF08125 125 12.3
RF08150 150
Size Pitch (mm) Max. allowable load (kN)
RF10100 100 17.7
RF10125 125
RF10150 150 17.7
RF12200 200 26.5
RF12250 250
RF17200 200 35.8
RF17250 250
RF17300 300
Size Pitch (mm) Max. allowable load (kN)
RF26200 200 46.1
RF26250 250
RF26300 300
RF26450 500

Inch

Size Pitch (mm) Max. allowable load (kN)
RF430 101.6 8.35
RF204 66.27 12.3
RF450 101.6 12.3
RF650 152.4 14.2
Size Pitch (mm) Max. allowable load (kN)
RF214 101.6 18.6
RF205 78.11 18.6
RF6205 152.4 26.5
RF212 152.4 38.5