| Classification by Use |
Features |
| General Use |
- Most general purpose chain in our attachment chain line-up.
|
- Most general purpose chain in our attachment chain line-up.
|
| Lube-Free |
- Our best lube-free, long life product.
- Achieved 2x wear life over existing specifications through improved bushing.
(over 14x improvement in RS100 and under compared to standard small pitch conveyor chains)
Can be used in -10°C to +60°C (+14°F to +140°F) environments.
|
- Nickel plated Lambda Chain for superior anti-rust capabilities.
|
- The definitive lube-free small pitch conveyor chain.
- Achieved over 5x wear resistance of Lambda Chain through oil-impregnated felt seal. (In-house comparison: -10°C to +60°C (+14°F to +140°F))
|
| Lube-Free / Lightweight / Low-Noise |
- Pin and pin link plate use SUS304, roller link uses engineered plastic.
- Lube-free, lightweight, low noise. (5dB lower than standard small pitch conveyor chains)
|
- Engineered plastic sleeve between pins and bushings as well as engineered plastic rollers. Steel and stainless steel rollers are also available.
|
| Corrosion Resistant |
Slightly Corrosion Resistant |
- Standard small pitch conveyor chain with nickel plating for an attractive appearance.
- Slightly corrosion resistant.
|
- Special surface treatment on standard small pitch conveyor chains.
- Plated roller chain for superb corrosion resistance in wet environments. Same drive performance as standard small pitch conveyor chains.
|
- Chrome-free environmentally friendly chain.
- Zinc and special surface treatment coating on standard small pitch conveyor chains.
- Suitable for water, acid, alkaline, and other corrosive environments.
- Same drive performance as standard small pitch conveyor chains.
|
| Heat Resistant |
- Small pitch conveyor chain using SUS304.
- Suitable for water, acid, alkaline, and other corrosive environments.
- Can be used in low and high temperature environments (-20°C to +400°C (-4°F to +752°F)).
|
| Highly Corrosion Resistant |
- Engineered plastic sleeve between pin and bushing. (PAT.)
- 4-10x wear life compared with SS.
- Roller material is available in SUS304 and engineered plastic.
|
- Pin and roller use precipitation hardened stainless steel.
- Maximum allowable load is approx. 1.5x that of SS.
- Slightly less corrosion resistant than SS.
|
| Lightweight / Low-Noise / Heat Resistant |
- Uses engineered plastic rollers.
- Uses special engineered plastic rollers for greater noise reduction over regular engineered plastic rollers.
- Uses super engineered plastic rollers with greater heat resistance than regular engineered plastic rollers.
|
| High Precision / Indexing Conveyance |
- Zero wear elongation chain that uses a special needle cage.
- Low cost alternative to Bearing Bushing Chains.
|
- Zero wear elongation chain that uses special needles.
- High precision and stainless steel specifications available in addition to our standard specification.
|
- This high precision chain has a unique block construction with a chain pitch accuracy of ±0.05mm.
- Center rollers and pins for jig mounting are used to prevent lateral rolling.
|
- This high-precision chain uses an aluminum block and has a ±0.05mm chain pitch accuracy.
- Inertial load under light loads is lessened, and a compact design is possible including the drive parts.
|
- Tact Veyor DAX is a self-contained chain conveyor unit that has a repetitive stopping accuracy of ±0.15mm.
- A conveyor unit compact in design.
|
| Special Applications |
- This is a design stock chain that consolidates proven special dimensions.
- Best suited for situations where standard dimensions aren't exactly suitable.
- Lube-free Lambda Chain is also available.
|
