Plastic Series  Open type  TKQ Series

Product photo
  • Cable carrier with lower noise, lower dust generation and lower vibration than TKP series MW type and enables high-speed operation.
  • ・Achieves cleanliness ISO class 4. (From our in-house test results )
  • ・Provides cable/hose protection under high-speed, high-acceleration usage conditions.

Features

1.Low Noise

Enables low bending noise and low noise from collisions with floor surfaces thanks to its short-pitch.

・Relationship between pitch and noise

Conventional cable carrier has a link structure, which causes bending and collision noises with floor due to polygonal movements.

TKQ series uses a relatively soft resin and Tsubaki's original continuous structure, so bending noise is small, and collision noise with floor is also small due to bending movement close to an arc, resulting in a low noise.

2.Generates less wear debris

Dust generation is suppressed as there is no sliding wear between pin and pin hole due to special continuous structure of link.

3.Longevity

Wire is incorporated in side bands to provide excellent bending resistance.

It did not break even in an in-house endurance test of 12 million strokes.

Longevity

4.Flexible

Side bands are flexible enough to withstand some twisting and lateral bending.

Flexible

5.High speed and high acceleration

It is lightweight and run with low vibration due to bending close to an arc.

(Maximum travel speed 600 m/min, maximum acceleration 4G )

6.Supports multi-layered division

Storage space can be divided into multiple layers, increasing the flexibility of layout.

Special specifications

Catalogs ・Instruction Manuals

List of Models

※Click the name for more information. Expand all Collapse all

Maximum outer diameter of cable/hose 25mm (TKQ15H28~)

Maximum outer diameter of cable/hose 38mm (TKQ20H42~)

Maximum outer diameter of cable/hose 52mm (TKQ25H58~)

Maximum outer diameter of cable/hose 65mm (TKQ30H72~)