Products Power Transmission Products

  • Plastic Series

TKZP Series

Easy to set cables/hoses just by wrapping the cable carrier around the cables/hoses and zipping it up on the inside.

Enables low noise/low debris generating operation thanks to its short-pitch and link-less structure.

We offer upgraded models with closing tool added.
You can zip up cable carriers more easily and quickly.

RoHS compliant

TKZP Series

1. Features

Easy to handle thanks to its zipper structure.
With the TKZP Series, cables and hoses can be set just by wrapping the cable carrier around the cables/hoses and zipping it up on the inside. This contributes to reduced labor for installation or maintenance of cables/hoses. In addition, it is easy to cut to the required length.
fig.1

The image in the inset above shows the TKZP with the zipper opened. *The red line represents a housed hose.

Provides stable movement and low noise/low debris generating operation.
Can bend in only one direction. Enables quiet, low debris operation thanks to its short-pitch and link-less structure.
We added models with an inner width of W20/W25.
We added models with an inner width of W20/W25 due to frequent customer requests. We've improved handleability and increased support capacity and mass.
Added a closing tool and upgraded models with a new shape.
Now you can zip the TKZP more easily and quickly.。

New shape

fig.2

2. List of models

Model No. Maximum support mass Overview
TKZP10H13-40W10 0.1kg/m Outer diameter of cables/hoses: less than φ6mm
Housing capacity: less than 40%
TKZP10H13-40W15
TKZP10H13-40W20 0.2kg/m
TKZP10H13-40W25

3. Example of installation

Standard installation Combined installation Vertical installation (inverted U-shape) Vertical installation (U-shape) Top surface-fixed installation
Example of installation Combined installation fig. Vertical installation (inverted U-shape) fig. Vertical installation (U-shape) fig. Top surface-fixed installation fig.
Guide rails are required on the sides of the fixed end brackets. Guide rails are required on both sides to prevent TKZP tipping or swaying. Guide rails that move along with the moving end brackets are required at the bottom.

4. Model Numbering Example

TKZP10 H 13 - 40 W 10
(1) (2) (3)
  1. (1) Model
  2. (2) Inner height
  3. (3) Inner width
Model numbering example (fixed end bracket) TKZP10H13W10-FO
Model numbering example (moving end bracket) TKZP10H13W10-MO
Model numbering example (closing tool) TKZP10H13-AST

*The cable carriers are delivered in boxes (one box = 10m x 1).