End fixtures
- The end fitting bolts and the special connecting links for lifting/hanging equipments, etc.
- These fixtures attach to the ends of RS Roller Chains to create reliable hanging equipment.
- They have the same or better strength than RS Roller Chain. Connected to a chain with the appropriate clearance, they fully demonstrate RS Roller Chain's capabilities.
※ | The CAD data contained herein is made available to you via the CAD drawing library; PARTcommunity is provided by CADENAS WEB2CAD Co. |
※ | Please direct your inquiries regarding the CAD data service or PARTcommunity to: CADENAS WEB2CAD Co. TEL: +81 (3) 5961-5031 FAX: +81 (3) 5961-5032 |
Catalogs ・Instruction Manuals
End Bolt (for RS Roller Chain )
Bolts used for attaching chains to equipment.
Types
Model No. | Applicable Chains | L mm |
A mm |
B mm |
C mm |
M mm |
O mm |
D mm |
CW mm |
SW mm |
H mm |
Estimated Mass kg |
DXF data 3D CAD data |
Standard Price | Delivery |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RS40EB | RS40-1 | 61.0 | 41.5 | 38 | 6.0 | M8 | 4.00 | 15 | 11.2 | 13.0 | 6.5 | 0.04 | DXF・3DCAD | Contact us for details. | Contact us for details. |
RS50EB | RS50-1 | 72.5 | 48.5 | 44 | 7.5 | M10 | 5.12 | 19 | 13.8 | 17.0 | 8.0 | 0.07 | DXF・3DCAD | Contact us for details. | Contact us for details. |
RS60EB | RS60-1 | 89.1 | 60.0 | 55 | 9.1 | M12 | 5.99 | 21 | 17.8 | 19.0 | 10.0 | 0.12 | DXF・3DCAD | Contact us for details. | Contact us for details. |
RS80EB | RS80-1 | 117.1 | 79.0 | 73 | 12.1 | M16 | 7.98 | 28 | 22.6 | 24.0 | 13.0 | 0.27 | DXF・3DCAD | Contact us for details. | Contact us for details. |
RS100EB | RS100-1 | 145.1 | 98.0 | 91 | 15.1 | M20 | 9.58 | 34 | 27.5 | 30.0 | 16.0 | 0.51 | DXF・3DCAD | Contact us for details. | Contact us for details. |
RS120EB | RS120-1 | 173.1 | 117.0 | 108 | 18.1 | M24 | 11.15 | 40 | 35.5 | 35.5 | 19.0 | 0.86 | DXF・3DCAD | Contact us for details. | Contact us for details. |
Notes
1.The SW dimension was designed to match the width of the two jaws of a wrench.
2.Uses former JIS B1181 (Category 1) for the nuts and JIS B1251 for the spring washers.
3.Coated black.
End-Fitting-Bolt Connecting Link (for RS Roller Chain )
Connects the end of the chain to the end-fitting-bolt.
Types
Model No. | Applicable Chains | P mm |
H mm |
D mm |
T mm |
L1 mm |
L2 mm |
Estimated Mass kg |
DXF data 3D CAD data |
Standard Price | Delivery | RS40EB-JL | RS40-1 | 12.70 | 12.0 | 3.97 | 2.0 | 8.8 | 10.2 | 0.01 | DXF・3DCAD | Contact us for details. | Contact us for details. |
---|---|---|---|---|---|---|---|---|---|---|---|
RS50EB-JL | RS50-1 | 15.875 | 15.0 | 5.09 | 2.4 | 10.7 | 12.3 | 0.02 | DXF・3DCAD | Contact us for details. | Contact us for details. |
RS60EB-JL | RS60-1 | 19.05 | 18.1 | 5.96 | 3.2 | 13.95 | 16.05 | 0.04 | DXF・3DCAD | Contact us for details. | Contact us for details. |
RS80EB-JL | RS80-1 | 25.40 | 24.0 | 7.94 | 4.0 | 17.45 | 20.05 | 0.09 | DXF・3DCAD | Contact us for details. | Contact us for details. |
RS100EB-JL | RS100-1 | 31.75 | 28.6 | 9.54 | 4.8 | 20.95 | 23.65 | 0.156 | DXF・3DCAD | Contact us for details. | Contact us for details. |
RS120EB-JL | RS120-1 | 38.10 | 34.4 | 11.11 | 5.6 | 26.05 | 29.55 | 0.264 | DXF・3DCAD | Contact us for details. | Contact us for details. |
Notes
1.Use an F-type connecting link if lateral forces are present.
2.Contact a Tsubaki representative regarding connecting links and end links with different shapes.