Products Power Transmission Products

  • Top chain accessories

Transfer Plates for WT3827-K Chain

Accessory that utilizes the full features of WT3827-K Plastic Modular Chains.

Combining raised rib type and modular chains eliminates the gaps in transfer areas.

  • Material: Reinforced polyamide
  • Plate length: 152mm
Transfer Plates for WT3827-K Chain

1. Features & Points of Caution

  • Combining raised rib type and modular chains eliminates the gaps in transfer areas.
  • Prevents entangling and catching, enables smoother transfers.
  • This is a made to order item.
  • Each transfer plate comes with two caps and mounting screws.

2. Installing transfer plates

See below regarding installation of transfer plates.

Installing transfer plates illustration
Model No. B (mm) D (mm)
WT-TP3827-L152 82 Dp/2 + 12.7
  • Dp = Pitch diameter
  • Use transfer plates with raised rib type chain.

3. Installing the caps and mounting screws

Attach transfer plate caps and mounting screws of transfer plate as shown on the right.

Also, adjust installation position of mounting screws in response to operating temperature conditions to allow for thermal expansion of the chain.
*See below

Installing the caps and mounting screws fig.

Under ambient temperatures (20°C) with no temperature changes

Install mounting screws for transfer plates 2 and 3 at the center of the long hole.

Under ambient temperatures (20°C)

Under low temperatures conditions

Install mounting screws for transfer plates 2 and 3 closer to the center of the chain.

Under low temperatures conditions

Under high temperatures conditions

Install mounting screws for transfer plates 2 and 3 closer to the end of the chain.

Under high temperatures conditions

4. Model Numbering Example

WT - TP 3827 - L152
(1) (2) (3) (4)
  1. (1) Model No.
  2. (2) Simplified code: TP = Transfer Plate
  3. (3) Chain model number
  4. (4) Plate length: L152 = 152mm