Chain guide parts for Top Chain.
Use the return roller as a support for the top of the chain on the return side of the conveyor.Roller rotation reduces sliding resistance and reduces scratches on the top surface of the chain.
- Top chain components
Return roller, Guide flange
Products News
- 2020.04.01
- New products: Small-diameter return rollers and guide flanges with an outer diameter of φ20 have been added.
- Frequently
updated -
We will be discontinuing sales of some accessories for Top Chain (return rollers and guide flanges).
→ Click here for more information
1．Return roller
Small diameter Return roller
- Material: Polyamide
- Standard product
- Operating temperature: -20 to 80°C
- It may not be available depending on the chain.Contact a Tsubaki representative for more information.
| Model No. | Diameter | Width | Applicable Guide Flange |
|
|---|---|---|---|---|
| Outer diameter |
Inner diameter |
|||
| TP-RR20650 | φ20 | φ6.5 | 49mm | TP-DP206 |
| TP-RR30850 | φ32 | φ8.5 | 49mm | TP-DP308 |
| TP-RR41050 | φ40 | φ10.5 | 49mm | TP-DP410 |
Return roller
- Material: Polyamide
- Standard product
- Operating temperature: -20 to 80°C
- Use return a roller of Φ15.5 shft bore diameter for plastic chain.
- Use an outer diameter φD=40 in combination with stainless-steel Plastic Top Chains.
- The outside diameter φD=60 should be used in combination with plastic top chain.
| Return roller Model No. |
Shft bore diameter |
Applicable Guide Flange |
|---|---|---|
| TP-RR41532 | φ15.5 | TP-DP415 |
| TP-RR41544 | ||
| TP-RR42032 | φ20.5 | TP-DP420 |
| TP-RR42044 | ||
| TP-RR61532 | φ15.5 | TP-DP615 |
| TP-RR61544 | ||
| TP-RR62032 | φ20.5 | TP-DP620 |
| TP-RR62044 |
2．Split-Hub Return Roller
No flange
| Model No. | Shaft diameter |
Equivalent to MB |
|---|---|---|
| TP-C122113NT-RR | φ15.5 | MB554-695141-RR |
| TP-C12535NT-RR | φ20.5 | MB554-695171-RR |
With flange
- Material: Polyamide
- Standard product
- Operating temperature: -20 to 60°C
- Suitable for wide top chain.
| Model No. | Shaft diameter |
Equivalent to MB |
|---|---|---|
| TP-C122116NT-RR | φ15.5 | MB556-695221-RR |
| TP-C12536NT-RR | φ20.5 | MB556-695251-RR |
3. Guide Flange
Guide Flange
- Material: Polyamide
- Standard product
- Operating temperature: -20 to 80°C
| Model No. | Diameter | Compatible Return roller |
|
|---|---|---|---|
| Outer diameter |
Inner diameter |
||
| TP-DP206 | φ32 | φ6.5 | TP-RR20650 |
| TP-DP308 | φ45 | φ8.5 | TP-RR30850 |
| TP-DP410 | φ55 | φ10.5 | TP-RR41050 |
| TP-DP415 | φ16 | TP-RR41532, TP-RR41544 |
|
| TP-DP420 | φ21 | TP-RR42032, TP-RR42044 |
|
| TP-DP615 | φ80 | φ16 | TP-RR61532, TP-RR61544 |
| TP-DP620 | φ21 | TP-RR62032, TP-RR62044 |
|
Guide Flunge (For no Split-Hub Return Roller)
- Material: Polyamide
- Standard product
- Operating temperature: 0 to 80°C
- Use with split-hub return roller without guide flange.
| Model No. | Shaft diameter | Equivalent to MB |
|---|---|---|
| TP-C12842T-GF | φ15.5 | MB555-695181-GF |
| TP-C12534T-GF | φ20.5 | MB555-695211-GF |
Return roller installation examples
Disc Plates/Guide Flange
2 return rollers and spacers
Split-Hub Return Roller (with flange)
When the direction of travel between two strands of chain is backward, or their speeds are different
- Use PVC pipe or similar material instead of the spacer shown above to adjust the distance between return rollers when the plate width is greater than 83mm.
- Return rollers for stainless steel top chain will not rotate when combined with plastic chain, and may cause uneven wear of top plate surfaces.
-
See illustration below for wide width Top Chain.
Notice: Curved frame end sections should not be in the inner side of the guide width.
