Chain pitch: 15 mm, chain width: 50 mm/100 mm fixed width type
Small pitch chain -- perfect for conveying small conveyors.
Expanded line-up: Now in 100mm width.
-
WT1515G-M: Closed type
(with tab guide attachments)
- Plastic Modular Chain
WT1515G-M Series
1. Features
- New 100mm width type
- Now easier to replace flat belt conveyors because chains are available in the same 50mm and 100mm widths these conveyors use.
- With tab guide attachments
- Perfect for single filers with different speeds on the right and left sides.
- No dead plate (straight layout)
- Enables straight layouts with no dead plates. Less space and fewer motors are required compared to when using curved belts, and there is no need to adjust the transfer (height) upstream and downstream of the conveyor.
- No dead plate (straight layout)
- Enables straight layouts with no dead plates. Less space and fewer motors are required compared to when using curved belts, and there is no need to adjust the transfer (height) upstream and downstream of the conveyor.
Plastic Modular Chain
2 motors/Where transfer is adjusted: 1 location
Belt conveyor Example 1
3 motors/Where transfer is adjusted: 2 locations
Belt conveyor Example 2
2 motors/Where transfer is adjusted: height gap
○: Where transfer is adjusted
2. Line-up
| WT1515G-M50 | WT1515G-M100 |
|---|---|
| Closed type with tab guide attachments Chain width: 50mm |
Closed type with tab guide attachments Chain width: 100mm |
 |
 |
Cannot use bearing type nose bars
3. Model Numbering Example
| WT | 15 | 15 | G | - | M | 50 | - | ALF |
| (1) | (2) | (3) | (4) | (5) | (6) | (7) |
- (1) Model
- (2) Chain pitch: 15 = 15mm
- (3) Type
- (4) G: With tab guide attachments
- (5) M: Fixed width
- (6) Plate width: 50 = 50mm, 100 = 100mm
- (7) Series code*: ALF = Ultra-low friction and wear resistant, LFG = Low friction
- *Click here for more information on each series
- Detailed information on each series
Notice: Integration of ULF Series with ALF Series
- We will be integrating ULF Series Plastic Top Chain with ALF Series on orders from April 2017.
- We will be integrating ALF Series with ULF Series Plastic Modular Chain and Plastic Block Chain on orders from June 2017.
- Contact a Tsubaki representative for more information regarding ULF Series after integration.
- ALF Series (ultra-low friction and wear resistant series) dramatically reduces the amount of wear debris generated from sliding with running rails (ultra high molecular weight polyethylene) under non-lubricated conditions while maintaining the same ultra low coefficient of friction coefficient as the conventional ULF Series.
