Motor option with brake for power cylinder Common to U/T/G series
Special brake motors for various environments and regions are available as an option.
- Heat resistance
- Waterproof
- Inverter drive
- Pressure-resistant and explosion-proof
- High Efficiency
- Overseas standard
- Motor customer mounting
Model No. examples
LP | T | C | 4000 | L | 10 | V | T1 | LJ | - | TK |
| Series (U・T・G) |
| Voltage code |
| | |
| ※Add -TK at the end. |
|||||||
Motor Option Code |
Brake motor variations introduction
Motor | Package | Code | Applicable capacity (kW) |
Allowable ambient temperature ※1 |
Heat-resistance class ※2 |
Percentage duty cycle %ED |
Time Rating | Brake power supply module | Protection level |
---|---|---|---|---|---|---|---|---|---|
Standard (0.1~3.7kW) | Heat-resistance class Class B | - | 0.1~3.7 | -15~40℃ | B | 25 | S2 30min | Built into the terminal box | IP55 |
Standard (5.5~15kW) | Heat-resistance class Class B | - | 5.5~15 | -15~40℃ | B | 25 | S1 | Built into the terminal box | IP55 |
Heat resistance 40℃ Class F | Heat-resistance class Class F | T1 | 0.1~1.5 | 0~40℃ | F | 25 | S2 30min | Built into the terminal box | IP55 |
Heat resistance 60℃ Class F | Heat-resistance class Class F | T2 | 0.1~1.5 | 0~60℃ | F | 15 | S2 15min | Separate replacement ※3 | IP55 |
Heat resistance 80℃ Class F | Heat-resistance class Class F | T3 | 0.1~1.5 | 0~80℃ | F | 5 | S2 5min | Separate replacement ※3 | IP55 |
Heat resistance 80℃ Class H | Heat-resistance class Class H | T4 | 0.1~1.5 | 0~80℃ | H | 15 | S2 15min | Separate replacement ※3 | IP55 |
Protection level IP56 | Meets waterproof requirements higher than the standard (IP55) | W | 0.1~1.5 | -15~40℃ | B | 25 | S2 30min | Built into the terminal box | IP56 |
Inverter drive | Constant thrust operation can be performed in the range of 6 to 60Hz | Z | 0.1~1.5 | 0~40℃ | F | 25 | S2 30min | Built into the terminal box | IP55 |
Pressure-resistant and explosion-proof | Structural standard :d2G4 | D | 0.2~1.5 | -10~40℃ | B | 25 | S3 40% | - | IP44 |
High efficiency motor | Premium Efficiency IE3 | E | 0.75~11 | 0~40℃ | B | 25 | S1 | Built into the terminal box | IP55 |
CE marking | Target standard EN60034-1 | N | 0.1~0.4 | -15~40℃ | B | 25 | S2 30min | Built into the terminal box | IP55 |
UL-compliant | Target standard UL1004 UL File No.E225995 |
N2 | 0.1~0.4 | -15~40℃ | A | 25 | S2 30min | Built into the terminal box | IP20 |
CCC-compliant | National standard :GB12350 | N3 | 0.1~0.4 | -15~40℃ | E | 25 | S2 30min | Built into the terminal box | IP55 |
Adapter package | Easy installation of customer-provided motors (Dimensions below ) |
A | 0.1~7.5 | - | - | 25 | - | - | - |
- ※1 No condensation
- ※2 The heat resistance class of the brake is B.
- ※3 Install the power supply module in a 40°C or lower environment. The motor terminal with a heat resistance of 80°C is a lug type.
Heat resistance 80℃ The power supply voltage to the class H power supply module is only 200-220V.
Click here for more information on motor options
Basic motor specifications
Common specifications
- ・Adaptable models :Power Cylinder U Series ・T Series ・G Series
- ・Adaptive motor capacity :0.1kW~3.7kW
- ・Totally outdoor type (IP55)、With brake
- ・Heat-resistance class B
Standard voltage
・Voltage code :No symbol (200 VAC class )、V(400 VAC class )
- operating temperature range :-15~40℃(No condensation )
- Percentage duty cycle :25%ED
- Rating :S2 30min
- Brake power supply module :Built into the terminal box
・Notes
For using the brakes by external wiring, contact us.
Different voltage supported
・Voltage code :V1(380V,50Hz)、V2(380V,60Hz)、V3(415V,50Hz)、V4(460V,60Hz)
Motor variation
IP56 series :W
Equipment related to ships and harbors often requires a high level of protection. This time, in order to meet the requirements, we will support IP56 (dust-proof and water-resistant).
Common specifications
- ・Adaptable models :Power Cylinder U Series ・T Series ・G Series
- ・Adaptive motor capacity :0.1kW~1.5kW
- ・Totally outdoor type 、With brake
- ・Heat-resistance class (B)
IP56 motor compliant
・Model No. :W(200 VAC class )、VW(400 VAC class )
- operating temperature range :-15~40℃
- Percentage duty cycle :25%ED
- Rating :S2 30min
- Model :Totally-enclosed self-cooled type three-phase induction motor
Heat-resistant package :T
Compared with conventional products, substantial reduction in delivery time and price reduction have been realized. Also, heat resistance class “H”, which would conventionally be unavailable, can be met.
Common specifications
- ・Adaptable models :Power Cylinder U Series ・T Series ・G Series
- ・Adaptive motor capacity :0.1kW~1.5kW(Please contact us for larger capacity. )
- ・Totally outdoor type (IP55)、With brake (The heat resistance class of the brake is B. )
Heat resistance class “F” supported
40℃
・Model No. :T1(200 VAC class )、VT1(400 VAC class )、V1T1(380V,50Hz)、V2T1(380V,60Hz)、V3T1(415V,50Hz)、V4T1(460V,60Hz)
- operating temperature range :0~40℃(No condensation )
- Percentage duty cycle :25%ED
- Rating :S2 30min
- Brake power supply module :Built into the terminal box
60℃
・Model No. :T2(200 VAC class )、VT2(400 VAC class )、V1T2(380V,50Hz)、V2T2(380V,60Hz)、V3T2(415V,50Hz)、V4T2(460V,60Hz)
- operating temperature range :0~60℃(No condensation )
- Percentage duty cycle :15%ED
- Rating :S2 15min
- Brake power supply module :Separate replacement (Standard DC module )
・Install in a 40°C or lower environment.
・If being built into the terminal box is desired, contact us.
80℃
・Model No. :T3(200 VAC class )、VT3(400 VAC class )、V1T3(380V,50Hz)、V2T3(380V,60Hz)、V3T3(415V,50Hz)、V4T3(460V,60Hz)
- operating temperature range :0~80℃(No condensation )
- Percentage duty cycle :5%ED
- Rating :S2 5min
- Brake power supply module :Separate replacement (Standard DC module )
・Install in a 40°C or lower environment.
・Notes
The motor terminal is a lug type.
Heat resistance class “H” supported
・Model No. :T4(200 VAC class )、VT4(400 VAC class )、V1T4(380V,50Hz)、V2T4(380V,60Hz)、V3T4(415V,50Hz)、V4T4(460V,60Hz)
- operating temperature range :0~80℃(No condensation )
- Brake power supply module :Separate replacement (Special DC module )
・Install in a 40°C or lower environment.
・The power supply voltage to the brake power supply module is 200-220V only.
・Notes
The motor terminal is a lug type.
IE3 motor specifications :E
The motor with brake used in the standard power cylinder is a short-time duty (type S2) as standard.
Power cylinder must not need criteria for IE3 premium efficiency class, however, it can be equipment IE3 motor on customer request.
*Notes :Please note that motor size, wiring and current values will vary.
Common specifications
- ・Adaptable models :Power Cylinder U Series ・T Series
- ・Adaptive motor capacity :0.75kW~11kW
- ・Totally outdoor type (IP55)、With brake
- ・operating temperature range :0~40℃(No condensation )
- ・Brake power supply module :Built into the terminal box
IE3 motor specifications
・Model No. :E(200 VAC class )、VE(400 VAC class )
Inverter series :Z
Compared with conventional products, substantial reduction in delivery time and price reduction have been realized. The controllability of power cylinders has been improved as speed control including acceleration and deceleration and speed variations can be performed easily.
Also, outdoor type with brake is standard.
Common specifications
- ・Adaptable models :Power Cylinder U Series ・T Series ・G Series
- ・Adaptive motor capacity :0.1kW~1.5kW(We can handle more than this. )
- ・Totally outdoor type (IP55)、With brake (The heat resistance class of the brake is B. )
- ・Heat-resistance class F
- ・Constant torque operation can be performed in the range of 6 to 60Hz
Suitable for variable frequency drives
・Model No. :Z(200 VAC class )、ZV(400 VAC class )
- operating temperature range :0~40℃(No condensation )
- Percentage duty cycle :25%ED
- Rating :S2 30min
- Brake power supply module :Built into the terminal box
・Notes
Apply not inverter output but normal power supply voltage to the brake power supply module.
Applicable power supply voltage is 200 to 220V for 200V class and 400 to 440V for 400V class.
Global specification :N
Power cylinders conforming to worldwide directives, standards and systems (CE, UL and CCC) are available.
They can be used for equipment to be exported abroad.
Common specifications
- ・Adaptable models :Power Cylinder U Series ・T Series ・G Series
- ・Adaptive motor capacity :0.1kW~0.4kW(We can handle more than this. )
- ・operating temperature range :-15~40℃(No condensation )
- ・All with brakes
・Notes
Only brake motors are compliant with the standards. If limit switches, etc., are required, contact us.
CE compliant
・Model No. :N(200 VAC class )、VN(400 VAC class )
・Specifications (both N and VN) Protection :IP55
Heat-resistance class :(B)
Target directive and standard
Target directive :Low Voltage Directive 73/23/EEC(Low Voltage Directive )
Target standard :EN60034-1
(General motor regulations )
Products exported to Europe must bear the CE mark in order to be sold on the European market. The CE marking indicates the product complies with safety regulations stipulated in European EC directives. (CE compliance means that the product is affixed with the CE mark which certifies that it conforms to applicable EC directives. )
UL-compliant
・Model No. :N2(230/240V,60/60Hz)、VN2(460V,60Hz)
・Specifications (both N2 and VN2) Protection :IP20
Heat-resistance class :(A)
Target directive and standard File No.
Target standard :UL1004
UL File No.:E225995
“UL” is an acronym for Underwriters Laboratories Inc., the representative product-safety testing and certification organization in the United States. (UL compliance means the product is affixed with the UL mark which certifies the product conforms to UL standards by using a UL approved motor. )
Our products conform to both UL and CSA standards and are C-UR models.
CCC-compliant
・Model No. :N3(200/220/200/220V,50/50/60/60Hz、0.4 kW is only available in 220/220 V, 50/60 Hz. )、VN3(380V/50Hz)
・Specifications (both N3 and VN3) Protection :IP55
Heat-resistance class :(E)
※Figures in brackets ( ) vary depending on motor capacity.
National standard :GB12350
The CCC mark is a compulsory certification system used in China. Any small-power motors of 1.1 kW or less being exported to China must display a CCC mark to indicate compulsory certification.
Our products have received certification from the China Quality Certification Centre (CQC).
Pressure-resistant and explosion-proof package :D
Power cylinders with pressure-resistant explosion-proof specifications for use in Class 1 and 2 hazardous areas are now available with short delivery times.
Pressure-resistant explosion-proof structure is a structure in which if an explosive gas explodes inside the container, the container can withstand the pressure and there is no danger of the external explosive gas igniting.
Common specifications
- ・Adaptable models :Power Cylinder U Series ・T Series ・G Series
- ・Adaptive motor capacity :0.2kW~1.5kW(We can handle more than this. )
- ・Totally outdoor type (IP44)、With brake
- ・Heat-resistance class B
d2G4 compliant
・Model No. :D(200 VAC class )、VD(400 VAC class )
- operating temperature range :-10~40℃(No condensation )
- Percentage duty cycle :25%ED
- Rating :S3 40%
- Brake power supply module :None (AC brake )
・Notes
With two external limit switches for stroke adjustment (optional accessory separately) are also available with pressure-resistant explosion-proof specifications.
Please contact us separately.
Brake motor option symbol list
Motor Specifications | Voltage ・Frequency | |||||
---|---|---|---|---|---|---|
200/200/220V 50/60/60Hz |
400/400/440V 50/60/60Hz |
380V 50Hz |
380V 60Hz |
415V 50Hz |
460V 60Hz |
|
Standard | No symbol | V | V1 | V2 | V3 | V4 |
Heat resistance 40℃ Class F | T1 | VT1 | V1T1 | V2T1 | V3T1 | V4T1 |
Heat resistance 60℃ Class F | T2 | VT2 | V1T2 | V2T2 | V3T2 | V4T2 |
Heat resistance 80℃ Class F | T3 | VT3 | V1T3 | V2T3 | V3T3 | V4T3 |
Heat resistance 80℃ Class H | T4 | VT4 | V1T4 | V2T4 | V3T4 | V4T4 |
Protection level IP56 | W | VW | - | - | - | - |
Inverter drive | Z | ZV | - | - | - | - |
Pressure-resistant and explosion-proof | D | VD | - | - | - | - |
High efficiency motor | E | VE | - | - | - | - |
Motor Specifications | Voltage ・Frequency | |||||
---|---|---|---|---|---|---|
200/200/220V 50/60/60Hz |
230/240V 60/60Hz |
200/220/200/220V 50/50/60/60Hz |
380/400/400/440V 50/50/60/60Hz |
460V 60Hz |
380V 50Hz |
|
CE marking | N | - | - | VN | - | - |
UL-compliant | - | N2 | - | - | VN2 | - |
CCC-compliant | - | - | N3 | - | - | VN3 |
High Efficiency ・CE marking | EN | - | - | VEN | - | - |
High Efficiency ・UL-compliant | - | EN2 | - | - | VEN2 | - |
High Efficiency ・CCC-compliant | - | - | EN3 | - | - | VEN3 |
- ※All special specifications of brake motors other than the above shall be expressed as “X.”
- ※All models are quoted on a case-by-case basis.
Adapter package :A
To be prepared for customer-desired manufacturer, IEC, NEMA, overseas standards, and other special flange motors, adapters are available from us to facilitate installation.
Also, they are available for other special flange sizes and motor shaft diameters. Contact us for details.
Common specifications
- ・Adaptable models :Power Cylinder U Series ・T Series ・G Series
- ・Adaptive motor capacity :0.1kW~7.5kW
Adapter supported
・Model No. :A(Adaptable to all brake motors. )
・Standards use environment of power cylinder
- operating temperature range :-15~40℃(No condensation )※40°C or higher is also supported.
- Percentage duty cycle :Within 25%ED
・Notes
- ・The brake motor starting torque should be 200% or more of the rated torque.
- ・Make sure to prepare power cylinders with brakes because they are highly efficient.
- ・The brake torque should be 150% or more of the rated torque.
Adapter specifications dimension list
T series adapter type interface dimensions list (IEC standard motor )
Frame number | Speed | Motor Capacity | Frame number | AL | AD | AH | AK | B | AJ | S | T | U | W | Y | Tap dia | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
LPTB LPTC |
250 | S | 0.1 | 63 | 80 | Φ160 | - | Φ110G7 | 4 | Φ130 | 4Js9 | 12.8 | Φ11F7 | 15 | 25 | 4-M8 |
L | 0.1 | 72 | - | 5 | 14 | |||||||||||
M | 0.2 | - | ||||||||||||||
H | 0.4 | 71 | - | 5Js9 | 16.3 | Φ14F7 | 32 | |||||||||
LPTB LPTC |
500 | S | 0.1 | 63 | 80 | Φ160 | - | Φ110G7 | 4 | Φ130 | 4Js9 | 12.8 | Φ11F7 | 15 | 25 | 4-M8 |
L | 0.2 | 72 | - | 5 | 14 | |||||||||||
M | 0.4 | 71 | - | 5Js9 | 16.3 | Φ14F7 | 32 | |||||||||
H | 0.75 | 80 | 92 | Φ200 | □170 | Φ130H7 | 4 | Φ165 | 6Js9 | 21.8 | Φ19F7 | 20 | 42 | 4-M10 | ||
LPTB LPTC |
1000 | S | 0.2 | 63 | 80 | Φ160 | - | Φ110G7 | 4 | Φ130 | 4Js9 | 12.8 | Φ11F7 | 15 | 25 | 4-M8 |
L | 0.4 | 71 | 72 | - | 5 | 5Js9 | 16.3 | Φ14F7 | 14 | 32 | ||||||
M | 0.75 | 80 | 92 | Φ200 | □170 | Φ130H7 | 4 | Φ165 | 6Js9 | 21.8 | Φ19F7 | 20 | 42 | 4-M10 | ||
H | 1.5 | 90L | 8Js9 | 27.3 | Φ24F7 | 52 | ||||||||||
LPTB LPTC |
2000 | S | 0.4 | 71 | 85 | Φ160 | - | Φ110G7 | 4 | Φ130 | 5Js9 | 16.3 | Φ14F7 | 15 | 32 | 4-M8 |
L | 0.75 | 80 | 72 | Φ200 | - | Φ130G7 | 5 | Φ165 | 6Js9 | 21.8 | Φ19F7 | 16 | 42 | 4-M10 | ||
M | 1.5 | 90L | - | 8Js9 | 27.3 | Φ24F7 | 52 | |||||||||
H | 2.2 | 100L | 116 | Φ250 | □200 | Φ180H7 | 4.5 | Φ215 | 31.3 | Φ28F7 | 20 | 62 | 4-M12 | |||
LPTB LPTC |
4000 | S | 0.75 | 80 | 90 | Φ200 | - | Φ130G7 | 4 | Φ165 | 6Js9 | 21.8 | Φ19F7 | 20 | 42 | 4-M10 |
L | 1.5 | 90L | 72 | - | 5 | 8Js9 | 27.3 | Φ24F7 | 16 | 52 | ||||||
M | 2.2 | 100L | 116 | Φ250 | □200 | Φ180H7 | 4.5 | Φ215 | 31.3 | Φ28F7 | 20 | 62 | 4-M12 | |||
H | 3.7 | 112M |