Shock Monitor TSM4000C1 Series
- For crushers. Built-in forward/reverse sequencer type.
- This type can detect overload on crusher blades and output an automatic forward and reverse control signal when overload occurs.
Features
- ・Just by inputting starting (forward movement) signal, stopping, reverse movement and restarting during overload can be controlled without an external sequence program.
- ・In case the machine does not return to normal operation even after the preset reverse setting time has passed, the stopping signal is output to stop the device completely.
- ・The overload level, stop time and reverse running time can be set easily on site.
- ・For energy saving, automatic stoppage available under no load.
TSM4000C1 Basic Operation
Catalogs ・Instruction Manuals
List of Model Numbers
※Click the model No. for detailed information.
Standard type main unit and current sensor | Panel mounting type main unit and current sensor | Main unit only | Panel mounting bracket | Current sensor | Sensor cable | Double voltage resistor | I/O cable |
---|---|---|---|---|---|---|---|
TSM4000-U010 | TSM4000P-U010 | TSM4000C1 | TSM4-PL1 | TSM-U010 | TSM4-S01
TSM4-S03 TSM4-S05 TSM4-S10 TSM4-S20 TSM4-S30 |
TSM4-PR1 | TSM4-C01
TSM4-C03 |
TSM4000-U050 | TSM4000P-U050 | TSM-U050 | |||||
TSM4000-U100 | TSM4000P-U100 | TSM-U100 | |||||
TSM4000-U150 | TSM4000P-U150 | TSM-U150 | |||||
TSM4000-U200 | TSM4000P-U200 | TSM-U200 | |||||
TSM4000-M300 | TSM4000P-M300 | TSM-M300 | |||||
TSM4000-M400 | TSM4000P-M400 | TSM-M400 | |||||
TSM4000-M600 | TSM4000P-M600 | TSM-M600 | |||||
TSM4000-M800 | TSM4000P-M800 | TSM-M800 |