Products Power Transmission Products

  • Small-Size Gear Motor

Hypoid Motor Mini Series HMM

Gear Motors with a motor capacity range from 40W to 90W

Right-angle shaft type hypoid motor mini series

  • All models use aluminum frame motors and silent brakes
  • Compact, lightweight, and quiet operations
Hypoid Motor Mini Series HMM

1.Features

High Torque & High Efficiency
Capable of transmitting high torque due to lack of torque limitation at a low output rotation with a high reduction ratio. Delivers high efficiency and cost savings with less sliding than worm types.
Long Service Life
Provides an average of more than 10,000 hours operating life, top level in this class.
Flexible Installation
Upper and lower mounting pitches of the case are the same, making installation in different application easy.
Wide Reduction Ratio Range
A reduction ratio can be selected from between 1/5 and 1/240.
Outdoor Type Equivalent to IP65
All outdoor types are waterproof, and equivalent to IP65 under IEC standards.

2.Structure

Structure

3.Reference Number System

Reference Number System
(1) Product Series Name
HMM: Hypoid Motor Mini Series
(2) Motor Specs
T: Three-Phase, S: Single-Phase
(3) Motor Capacity
40: 40W, 60: 60W, 90: 90W
(4) Mounting Type
L: Foot Mount Type
U: Face Mount Type
H: Hollow Shaft Type
(5) Reduction Ratio (Example)
8: 1/8, 50: 1/50, 240: 1/240
(6) Shaft Arrangement
L: Output shaft located to the left as viewed from the motor side
T: Output shaft located on both sides
R: Output shaft located to the right as viewed from the motor side
S: For face mount type only. (Output shaft located to the left as viewed from the motor side)
No Code: Hollow Shaft Type
(7) Brake
No Code: Non-Brake Type, B: Brake Type
(8) Specification Code
No Code: Lead Wire Outlet Type
W: Outdoor Type
J: Waterproof Type
V: Double Voltage (Three-Phase 400V Class, Single-Phase 200V Class)
WV: Outdoor, Double Voltage (Three-Phase 400V Class, Single-Phase 200V Class)
P: Resin Terminal Box Attached
PV: Resin Terminal Box Attached, Double Voltage
  (Three-Phase 400V Class, Single-Phase 200V Class)
N2: UL Compliant (Three-Phase 60W and 90W non-brake type only)
N3: CCC Compliant (Three-Phase 60W and 90W non-brake type only)
  • N2 and N3: Global Series
  • Outdoor specification (W) is equivalent to waterproof specification IP65.
  • Outdoor specification (W) can be fabricated with the brake (B).
  • Resin terminal box type (P) cannot be made with the brake (B).
  • Please contact us for single-phase 90W (HMMS90) outdoor type (W) and single-phase 90W (HMMS90) brake type (B).
  • The motor does not have micro surge voltage suppression function.
  • *Three-phase 400V class cannot be driven with an inverter.
  • Three-phase 200V class can be driven with an inverter, but continuous operation in low frequency and higher than 60Hz is not possible.
  • Click here for Global series voltages

4.Standard Models

Motor Capacity Reduction Ratio
Single-/Three-Phase 40W 1/5 to 1/240
60W 1/5 to 1/240
90W 1/5 to 1/240