Products Power Transmission Products

  • Top chain components

Bearing heads and support heads

Supports conveyor frames from underneath.

Used to secure pipes onto frames.
*Wiring can be installed inside the bearing head.

Bearing head

1. Bearing Head Line-up

  • Load capacity: 9.8kN{1000kgf} or more (when a pipe is inserted and load is suspended vertically)
  • Pipe holding power: [*reference value] 0.78kN{80kgf} (when fastened with a bolt tightened to 14.7N·m torque)

Bearing Head (Mounting hole fixed type)

Model No.: TP-C14050T-BH Outer diameter of pipe used 48.6mm (Nominal diameter1 ½)

Bearing Head (Mounting hole fixed type) picture
  • Material: Main body = Reinforced polyamide, Bolt/Nut/Washer = Stainless steel
*Equivalent to MB
MB198-59161-BH

Bearing Head (Mounting hole variable type)

Model No.: TP-C14741T-BH, TP-C14739T-BH

Bearing Head (Mounting hole variable type) picture
  • TP-C14741T-BH: Outer diameter of pipe used 48.6mm (Nominal diameter1 ½)
  • TP-C14739T-BH: Outer diameter of pipe used 60.5mm (Nominal diameter2)
  • Material: Main body = Reinforced polyamide, Bolt/Nut/Washer = Stainless steel (SUS304)
  • Dimensions were changed in June 2011.
*Equivalent to MB
MB280-63503-BH
MB280-66781-BH

2. Support Head Line-up

Support Head

Model No.: TP-CPSH48, TP-CPSH60

Support Head picture
  • TP-CPSH48: Outer diameter of pipe used 48.6mm (Nominal diameter1 ½)
  • TP-CPSH60: Outer diameter of pipe used 60.5mm (Nominal diameter2)
  • Material: Main body = Reinforced polyamide, Bolt/Nut = Stainless steel

3. Bearing head mounting examples

See the diagram at the right for bearing head mounting.

Click below for more information on each part.

Bearing Head mounting examples illustration