WT0405-W Series

・Pitch: 4.5mm ・Closed type
Modular chain made of PEEK plastic with a minimum pitch

WT0705-W Series

・Pitch: 7.5mm ・Closed type
Modular chain made of standard materials with a minimum chain pitch, and optimal for conveying small items.

WT1515-W/WT1516-W Series

・Pitch: 15mm ・Closed and open types
・The combination with nose bars enables more compact conveyor ends.

WT1516-W Open type has been added to our line-up (January 2018)

BT5 Series

・Pitch: 15mm ・Net type
・Short pitches enable stable conveyance and more compact transfer areas.

BT6 Series

・Pitch: 19.05mm ・Closed, open types and net type
・Complete line-up of various upper surface shapes.

WT1907-K Series

・Pitch: 19.05mm ・Raised rib type
・Recommended for conveying small containers and rubber sheets.

BT8 Series

・Pitch: 25.4mm ・Closed type
・Top chain with high load, high speed conveyance abilities.

BTC8S Series

・Pitch: 25.4mm ・Closed type
・Ideal for sheet conveyance.

WT2250 Series

・Pitch: 25.4mm ・Closed, open, rubber, and flight types
・Line-up includes a chain with flights suited to inclined conveyance and a rubber type chain.

WT2515-W/WT2515G-W形

・Chain pitch: 25.4mm ・Closed type
・Ideal for beverage container conveyance.

WT2515F-W Series

・Pitch: 25.4mm ・Closed type
・Modular chain with flights that enable inclined conveyance

WT2500 Series

・Pitch: 25.4mm ・Closed and open types
・We increased the number of hinges and thickened the modular connections to give the chain increased strength.

BTM8H Series

・Pitch: 25.4mm ・Closed type (magnetic type)
・Magnets embedded in the links adhere to conveyed objects to enable inclined conveyance.

WT2700 Series

・Pitch: 27.2mm ・Closed and open types, (WT2705-K launched Apr. 1, 2014)
・Recommended for conveying containers, food products, and rubber sheet.

WT3000 Series

・Pitch: 30mm ・Closed and open types
・Has double the pitch of the WT1500 Series but can use the same sprocket. Can run parallel on the same shaft too.

WTU3015T-K Series

・Pitch: 30mm ・Closed type
・Enables various curved layouts at 90/180 degrees, S-curves, and so on.

Tsubaki has launched a new Plastic Modular Chain suitable for curved conveyance on January 1, 2020.

WT3109-W Series

・Pitch: 31.75mm ・Closed types
・WT3109-W Series can now be used on low-floor man conveyors (conveyor height = 250mm) thanks to its smaller chain pitch.

WT3816-K Series

・Pitch: 38mm ・Open type
・Perfect chain for heavy loads.

WT3827-K Series

・Pitch: 38.1mm ・Raised rib type
・Uses a sliding plug in the pin stopper system. Chain can be connected or disconnected with just a screwdriver.

WT3835-K/WT3835-T

・Pitch: 38.1mm ・Closed type
・Includes highly versatile pitches with float prevention tabs.

BTH16 Series

・Pitch: 50.8mm ・Closed type (heavy duty type)
・This highly durable chain has the largest allowable load of any plastic modular chain.

WT5707-K Series

・Pitch: 57.15mm ・Raised rib type
・With its large allowable load, this chain is ideal for conveying large containers, such as shower equipment.

BTC4-M Series

・Pitch: 12.7mm, Chain width: 50mm ・Closed type
・Stable conveyance for small containers

WT1505G-M Series

・Pitch: 15mm, Chain width: 75.8mm ・Closed type (with tab guide attachments)
・Perfect for single filers with different speeds for the right and left side chains.

WT1505GTO-M Series

・Pitch: 15mm, Chain width: 82.8mm, 158.8mm ・Transover type (with tab guide attachments) ・Guards are fitted on both ends of the chain to allow for smooth right-angle conveyance.

WT1515G-M Series

・Pitch: 15mm, Chain width: 50mm ・Closed type (with tab guide attachments)
・Perfect for single filers with different speeds for the right and left side chains.

BTC8H-M/BTM8H-M Series

・Pitch: 25.4mm, Chain width: 82.6mm ・Closed type, magnetic type (with tab guide attachments) ・Closed types suited for flat conveyance and magnetic types ideal for inclined conveyance.

WTM2535G-M Series

・Pitch: 25.4mm, Chain width: 82.6mm ・Closed type, magnetic type (with tab guide attachments) ・ Low-magnetic type that is suitable for curved conveyance and reduces damage to conveyed items/chains.

We added a new low-magnetic type on January 1, 2020.

WT2505-M Series

・Pitch: 25.4mm, Chain width: 82.6mm, 114.3mm ・Closed type
・Perfect for conveying medium-sized containers.

WT2505G-M Series

・Pitch: 25.4mm, Chain width: 82.6mm, 114.3mm ・Closed type (with tab guide attachments)
・Perfect for conveyors with different speeds for the right and left side chains.

WT2515G-M形

・Pitch: 25.4mm, Chain width: 83.8mm ・Closed type (with tab guide attachments)
・Ideal for beverage container conveyance.

BTO8-M Series

・Pitch: 25.4mm, Chain width: 83mm ・Open type (with tab guide attachments)
・Top plate surfaces have holes to eliminate excessive lubricant or water remaining on the top plate.

WT3005G-M Series

・Pitch: 30mm, Chain width: 75.8mm, 113.8mm ・Closed type (with tab guide attachments)
・Perfect for conveyors with different speeds for the right and left side chains.

WT3086G-M Series

・Pitch: 30mm, Chain width: 84.5mm ・Open type (with tab guide attachments)
・Perfect for conveyors with different speeds for the right and left side chains.

WT3835G-M Series

・Pitch: 38.1mm, Chain width: 82.6mm ・Closed type (with tab guide attachments)
・Perfect for conveyors with different speeds for the right and left side chains.

WT3085-C325 Series

・Pitch: 30mm, Chain width: 82.6mm ・Closed type (for sideflexing)
・The height from the guide rail to the chain upper surface is the same as with the WT1500/3000 Series.