Tsubaki NFV Flightveyor
Conveyors in Eco-related Industries
For conveying incinerated ash and fly ash.
Tsubaki NFV Flightveyor conveys materials such as incinerated ash and fly ash over several kinds of layouts.
Features and Conveying Capacity -- NFV Flightveyor
*Click the image of each structure to enlarge.
Enables flexible layouts.
A compact and economical type.
Uses the most suitable conveyor chain.
Corrosion-resistant conveyor chains and flights are available as an option.
Has a dust/water-resistant structure.
Conveying capacity
Model number
Conveying capacity (m3/ｈ)
S = 3m/min
S = 5m/min
S = 10m/min
NFV160
1.6
2.7
5.4
NFV160H
2.4
4.0
8.0
NFV240
3.6
6.0
12.0
NFV240H
4.8
8.0
16.0
NFV320
6.5
10.7
21.5
NFV320H
9.1
15.2
30.3
Note 1: The conveying capacity in this table are for when there is continuous and constant feeding.
Note 2: The conveying capacity differs depending on the nature of the conveyed materials.
Dimensions and Model Numbers
[NFV Series]
[NFV-W Series (With two shafts)]
Model number
Upper corner casing (With two shafts)
U2W1
U2W2
NFV160W (H)
410
412
NFV240W (H)
570
572
[NFV-W Series]
Available for conveying abrasive materials and long conveyors.
Model number
Upper corner casing
UW1
UW2
NFV160W (H)
700
702
NFV240W (H)
900
902
NFV320W (H)
1,100
1,102
Model number
Head casing
Outlet
Horizontal/Vertical casing
Foundation
H1
H2
H3
H4
E1
E2
E3
M1
M2
M3
M4
F
NFV160 (H)
260
800
375
75
400
244
100
160
320
180
255
75
(324)
(240)
(400)
NFV240 (H)
310
1,000
532
75
600
354
150
240
430
261
403
75
(434)
(320)
(510)
NFV320 (H)
395
1,200
632
100
800
466
200
320
566
341
493
100
(596)
(450)
(696)
Model number
Upper curved cacing
Lower curved casing
Inlet
Tail casing
U1
U2
B1
B2
J1
J2
J3
J4
J5
T1
T2
T3
T4
NFV160 (H)
1,050
1,000
1,052
950
240
150
220
750
700
400
150
352
325
(230)
NFV240 (H)
1,400
1,300
1,352
1,250
320
230
301
950
800
550
175
422
473
(310)
NFV320 (H)
1,750
1,600
1,652
1,550
400
310
391
1100
900
650
200
497
602
(440)
The values shown in () indicate wide dimensions.
Points of caution
The NFV Flightveyor is basically designed for conveying powder material less than 3mm. The anti-biting NFV Flightveyor is available for conveyed materials exceeding 3mm. Contact a Tsubaki representative for more details.
The anti-biting NFV Flightveyor also can handle materials such as RPF and shredded waste. Contact a Tsubaki representative for more details.
Download CAD drawings for NFV Flightveyor in DXF format
You can download CAD drawings for NFV Flightveyor in DXF format.
*Be sure to read before using. By downloading drawing data, please be aware that we regard you as having agreed with the following cautions.
The content of the drawing data is subject to change without notice.
We simplified all drawing data to reduce the size.
Consider all dimensions shown in the drawing data as reference except where noted. Contact a Tsubaki representative when using these dimensions to check for interference and so on.
Tsubaki is the copyright holder of the drawing data. Please refrain from leasing or transferring this data to a third party.
Please be aware that we accept no responsibility for any trouble owing to use of the drawing data or damage due to defects arising therefrom, nor from results caused by drawing editing/processing.
Click here for inquiries regarding Tsubaki's conveyors in eco-related industries.
